Function Control Panel; How To Use The Keys In The Manual Control Panel - elem COOL CLIMA AC120TIM-2IB Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Function Control Panel

1
2
1)
TIME
2) Up And Down Swing
3) Left And Right Swing
4) Ioniser
5) Mode
6) Speed
7) Cool
8)

3. How to use the keys in the manual control panel

The push-buttons belong to touch type. Touch the push-buttons on the board slightly then
correspondent functions can be implemented.
The buzzer will make out "Bi" sound in the first power on. Then the machine will enter into
standby state. At this moment the power light is on. Only
1) Power switch: This push-button is on the upper place of the back-frame. The button is in
"On" state initially. Once users want to power off the machine, then they can move the button
to its relevant screen printing place. The guiding light is on and off adhere with users'
operation.
2)
: Once the Air cooler is connected to electric, at the first time touch this key ,the up
and down air deflector will open automatically. The wind blower will run 5 seconds with its
middle wind speed. After 5 seconds it will come into low speed and the guiding light shown.
There is no Ioniser、time、Cool、left and right swing、up and down swing. When touch this
key in power, the up and down swing will close automatically.
3) Speed: At the initial state when powered on, the wind speed is low. By touching this key
users can change the wind speed: Low----Middle ---High----low in circulation. The relevant
guiding lights shown on according to their wind speed setting.
3
4
5
6
key are workable.
7
8

Publicité

Table des Matières
loading

Table des Matières