Mounting Bracket - Uniden UM425 Guide D'utilisation

Installing the Hardware
2. Position the radio into the desired location. Mark the edges of the
bracket on the mounting surface.
3. Remove the mounting bracket drill template from the back of the
manual, and use the template to mark the drill holes on the mounting
surface.
4. Drill the holes for the mounting bracket; be sure to follow any special
requirements of the mounting surface.
5. Remove the bracket from the radio, and use the mounting hardware to
secure the bracket to the mounting surface.
Hex nut
Spring washer
Washer
Hex bolt
6. Install the radio back into the mounting bracket.
Mounting
surface
E-43
Mounting
bracket