GB - INSTRUCTION MANUAL
2. PRODUCT DESCRIPTION
1 - Adjustable crown
2 - Piston
3 - Socket for handle
3. DESIGNATED USE
The hydraulic bottle jack is designed to lift loads (eg. steel beams, axles, vehicles) up to its maximum lifting
capability (see technical data). Any other use is prohbited. The buyer accepts all liabilities, legal and otherwise,
for any damage or injury resulting from improper use of the product (i.e. any other use than the above stated
designated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability or war-
ranty claims should the product be used in industrial and/or commercial operations.
5. TECHNICAL DATA
Max. load capacity:
Min. height piston:
Max. height piston:
Max. height crown:
Weight:
6. NOISE EMISSION VALUES
-
7. IMPORTANT INFORMATION FOR INITIAL OPERATION
The product is shipped ready-to-use.
Caution:
In accordance with current EU regulations this product is equipped with a slow release mechanism
that prevents any load from being lowered too fast. (max. 0,15 m/s)
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
4 - Handle
5 - Release screw
6 - Safety valve (DO NOT ADJUST!)
03267
03268
2 t
3 t
168 mm
188 mm
268 mm
303 mm
316 mm
363 mm
2,0 kg
2,8 kg
Page 8
03269
03270
5 t
8 t
222 mm
207 mm
332 mm
367 mm
402 mm
447 mm
3,7 kg
4,8 kg
Changes, print, punctuation and other errors reserved!
03271
03272
12 t
15 t
227 mm
227 mm
377 mm
377 mm
457 mm
457 mm
6,06 kg
7,0 kg
Instruction manual
03267-03272
Issue: 01/2019