Bresser 40-25820 Mode D'emploi page 20

"- - -" is shown, no distance or speed can be measured.
3. Measurement units: "M" (Meters; Fig. 3, 10a) or "Y" (Yards; Fig. 3, 11a), "M/S" (Meters per second; Fig.
3, 10b) or "KM/h" (Kilometers per hour; Fig. 3, 11b)
4. The standby function will be signalized by „TQL" (Fig. 3, 12).
6. There are four operating modes available:
Standard (no symbol): function for normal light conditions and measurement distances not exceed-
ing 155 m.
RAIN (Fig. 3, 16): function for weather and measurement distances up to 20 m.
>155 (Fig. 3, 17): function for normal light and distances over 155 m.
SPEED (Fig. 3, 18): function for normal light and speed measurement up to 300 km/h.
Cleaning and maintenance
Remove the device from it's energy source before cleaning (remove battery).
Lenses (eyepieces and/or object lenses) should be cleaned with a soft, lint-free cloth (e.g. micro-
fibre) only. Do not use excessive pressure - this may scratch the lens.
Dampen the cleaning cloth with a spectacle cleaning fluid and use it on very dirty lenses.
Protect the device from dust and moisture. Store the device in the bag supplied or in its original
packaging. Batteries should be removed from the device if it is not going to be used for a long
period of time.
- 20 -