La Cornue Cornuchef Manuel D'installation page 11

en
3. Drill the holes to size and place matching
dowels into them so that they are flush.
4. Attach the tower top hanging device (tower
retention bracket)
5. Screw hooking screws into the dowels
(Ø10 mm) until about 20 mm of each screw
still extend beyond the dowels.
6. Hang up the range hood and attach it
loosely using washers and nuts.
7. Align the range hood (check mounting
dimensions), tighten nuts.
8. If necessary, screw in two more screws to
ensure the range hood hangs securely.
9. (For exhaust air ventilation) Cut ventilation
hose to proper length.
10. (For exhaust air ventilation) Mount and
attach the ventilation hose and make sure it
does not buckle anywhere, as this could
obstruct the airflow.
11. Connect to the unit to electricity. If you
are using an external fan motor, connect the
power cord.
12. Bend the holder cut-outs in the tower top
about 2-3mm to the outside.
13. Push the tower top into the retention loop
of the tower hanging device until it locks into
place.
14. Expand the tower bottom slightly toward
the outside and mount it in place above the
tower top and the range hood module. When
you are done, the tower bottom will have to
rest on the hood.
15. Test the functions of the device.