Data Transfer; Application (App) - LaserLiner DampFinder Compact Plus Mode D'emploi

Data transfer

The device features a Bluetooth
data transfer to mobile devices with a Bluetooth
(such as a smartphone or tablet).
The system prerequisites for a Bluetooth
specified at http://laserliner.com/info?an=ble
The device can set up a Bluetooth
4.0 compatible devices.
The range is set to a maximum distance of 10 m from the terminal
device and greatly depends on the ambient conditions such as the
thickness and composition of walls, sources of interference as well
as the transmit / receive properties of the terminal device.
Once it has been activated, Bluetooth
indefinitely as the radio system is designed with exceptionally low
power consumption.
A mobile device can link up to the active measuring device via
an app.
* The Bluetooth
®
Bluetooth SIG Inc.

Application (app)

An app is required to use the Bluetooth
You can download the app from the corresponding stores
for the specific type of terminal device:
!
Make sure that the Bluetooth
mobile device is activated.
After starting the app and activating the Bluetooth
a connection can be set up between a mobile device and the
measuring device. If the app detects several active measuring
devices, select the matching device.
This measuring device can be connected automatically the next
time it is switched on.
* The Bluetooth
®
Bluetooth SIG Inc.
Calibration
The meter needs to be calibrated and tested on a regular
basis to ensure it produces accurate measurement results.
We recommend carrying out calibration once a year.
DampFinder Compact Plus
word mark and the logo are registered trademarks of
word mark and the logo are registered trademarks of
* function that enables wireless
®
* connection are
®
* connection with Bluetooth
®
* remains switched on
®
* function.
®
* interface of the
®
* interface
®
* function,
®
EN
17