Remington PR1250 Mode D'emploi page 4

ENGLISH
C GETTING STARTED
It is recommended that you use your new shaver daily for up to four weeks
to allow time for your beard and skin to become accustomed to the new
shaving system.
To confirm the model number of your shaver, please refer to the packaging
or open the trimmer where the model is printed in the upper right
corner of the rating information.
, CHARGING YOUR SHAVER
1 Ensure the appliance is turned off.
2 Connect the shaver to the adaptor and then to the mains.
3 Press the power switch to turn the product on.
4 Charge for at least 24 hours when using for the first time.
5 Allow 4 hours for a full charge generally.
6 When charging, the green indicator light will show (PR1250) or slowly flash
(PR1270). When fully charged, the green indicator light will turn off (PR1250)
or the green indictor light will show for 5 minutes and then turn off (PR1270).
7 To preserve the life of your batteries, let them run out every 6 months then
recharge for 24 hours.
8 The shaver automatically adjusts to a mains voltage between 100V and
240V.
F INSTRUCTIONS FOR USE
, SHAVING
• PR1250: Rechargeable
PR1270: Mains/Rechargeable
•
1 Make sure your shaver is properly charged.
2 Switch the shaver on.
3 Stretch the skin with your free hand so the hairs stand upright.
4 Only apply light pressure on the shaving head while shaving (pressing too
hard can damage the heads and make them vulnerable to breakage).
5 Use short, circular strokes.
, TRIMMING
6 Slide the trimmer button to release the detail trimmer.
7 Hold the trimmer at a right angle to your skin.
8 Place the trimmer at desired trim line for a quick, easy, professional trim.
9 To retract the trimmer, push down until it locks into position.
4