Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Yorkville
LS200P
Note: The LS200P built-in stand mounting adapter can be used with Yorkville
SW-Teletube accessory to support our E160 cabinets. The support tube can be adusted up to
it's full 5'4" extension safely as long as the LS200P is not inclined more than 10° (10 degrees).
WARNING: Larger/heavier cabinets should not be used with the stand mount!
Frequency Response (Hz +/- 3db)
Pole Mount Adapter (1 3/8 inch - 3.5cm)
Dimensions (DWH xbackW, inches)
Dimensions (DWH xbackW, cm)
Specifications
System Type
Subwoofer
Active
Active or Passive
Program Power (Watts)
200
Max SPL (dB)
125
50 - 110
Driver Configuration
10 inch
10 inch
LF Driver(s)
Electronic Limiting (excursion, thermal, clip)
LF Protection
LF Power Amplifier (Watts)
200
Power Cable
Yes
Power Switch
Yes
2 line inputs, 2 link (in/out)
Inputs - 1/4 inch Jacks
Main Volume
Level Controls
Other Controls / Features
Selectable line or speaker level input
Ground lift switch
Corners
Black Steel
Plastic Glides
Feet
2 Side mounted
Bar Handles
1 Top
Enclosure Materials
15mm (5/8 inch) 11-ply Russian Birch
Grille
Heavy gauge perforated metal
Covering / Finish
Black Ozite (Carpet)
27 x 17.5 x 14
69 x 44 x 36
Weight (lbs/kg)
57 / 25.9
Publicité
Table des Matières
