Ec Declaration Of Conformity - Systemair Rvk 250E2-A1 Notice De Montage

GB
Manufacturer
Our products are manufactured in compliance with applicable inter-
national standards and regulations.
Systemair GmbH
Seehöfer Str. 45
DE-97944 Windischbuch
GERMANY
Office: +49 7930 9272-0
Fax: +49 7930 9272-92
The manufacturer hereby confirms that the following products:
Circular duct fans
RVK, KD, K, KV
Isolated circular duct fans
FVT, KVK, KVKE, KVO
Rectangular duct fans
KVT, KE, KT, RS, RSI, KDRE-KDRD
Centrifugal fans
GT1, GT2, GC1, GC2, PRF, WVA, WVI, RSV
Roof fans
DHA, DVS, DVSI, DHS, DVN, DVNI, DVV, DVC, DVCI
Air handling units
C, F, K
Axial fans
AR, AW, AXM, AXC, AXC(B), AXC-G, AXC-P, AXR, AXCBF,
HA...(F), HA...(B), HABV...
Schubventilatoren
AJ (T), AJR, AJ8
Ventilation modules
LMR
Kitchen exhaust fans
KBT, KBR, MUB-K, KBR-F
Multibox fans
MUB
Fan heaters
FHW, Proff, AVR, SVA
Air curtains
PM, PB, PBL, AS, LG, LGW, HD, HDW, MTV
Comply with the following EC-directives:

EC Declaration of Conformity

as defined by the EC Machinery Directive
2006/42/EC, Annex II A. Fans for ventilation in air handling systems
with air from non-explosion hazardous premises.
The following harmonized standards are in use:
DIN EN 60 034-1 Rotating electric machinery; ratings and per-
formances.
DIN EN 60 204-1:2007
Safety of machinery; electrical equipment of machines; general
requirements.
SS-EN ISO 12100-1:2003.
Safety of machinery; basic concepts, general principles for design.
DIN EN ISO 13857
Safety of machinery; safety distances to prevent danger zones
reached by the upper limbs.
Remark: DIN EN ISO 13857 only complies when fitted contact safety
device is part of the extent of delivery.
EC Declaration of Conformity
as defined by the EC Low Voltage Directive 2006/95/EC.
The following harmonized standards are in use:
DIN EN 60 204-1:2007
Safety of machinery; electrical equipment of machines; general
requirements.
DIN EN 60 034-5:2007 + A1
Rotating electric machinery; part 5: Protection classification for
electric machinery.
DIN EN 60 335-1 (valid for items marked with *)
Electric domestic products and similar – safety-general require-
ments.
DIN EN 60 335-2-80 (valid for items marked with *)
Electric domestic products and similar – safety-general part 2: Special
requirements regarding fans.
DIN EN 50 366:2003+A1 (valid for items marked with*)
Electric domestic products and similar everyday articles-Electromag-
netic fields-Methods for evaluation and measurements
DIN EN 50 106:2007 Electric domestic products and similar-Safety-
Instructions for control of manufacture. Remark: EN 50 106:2007
complies for internally wired products only.
EC Declaration of Conformity
as defined by EC's EMC-directive 2004/108/EC.
The following harmonized standards are in use:
DIN EN 61000-6-3: Electromagnetic compatibility - Generic immunity-
Emission –Part 1: General requirements for equipment in homes,
offices, shops and similar environments.
DIN EN 61000-6-2 Electromagnetic compatibility (EMC) – Part
6-2: General requirements – Immunity for appliances in industrial
environments.
The complete technical documentation is available.
Windischbuch, 02.12.2014
Kurt Maurer
Managing Director