Publicité
The codes in Additional Pushbuttons must be
copied to the Receiver. Max. Pushbuttons
per Receiver = 15.
1. Press Receiver switch #1 and hold for 3
seconds, the green LED will start blinking.
Press the Pushbutton + button, green
LED will turn off.
2. Press Receiver switch #2 and hold for 3
seconds. The red LED will start to blink.
Press the Pushbutton - button, red LED
will turn off.
Individual Pushbutton codes cannot be
changed or deleted, only all codes can be
deleted for a new start. Hold Receiver switch
#1 for 3 seconds, release and hold again for
3 seconds. Repeat for switch #2.
13
Ref. 3800 2280, Ver 2004-06
Publicité
