Maxx-world Z 05795 Mode D'emploi page 19

base. Make sure that the LED spotlight cannot fall or be
pulled down.
4. Switch on the LED light by pressing the ON button (1) on
the remote control.
5. Use the control pad for colour selection (3) or the button
W (2) to select a colour. The selected colour will light up
continuously.
6. When you press the Smooth button (4), all of the different
colours are run through. The colours blend into one ano-
ther with a smooth transition. To switch off colour change
mode, press any selection button you want.
7. When you press the Strobe button (5), all of the colours
light up one after the other. To switch off colour change
mode, press any selection button you want.
8. When you press the Flash button (6), the four basic colours
W, R, G and B light up one after the other. To switch off
colour change mode, press any selection button you want.
9. To switch off the LED spotlight, press the OFF button (7).
19
– On the bottom of the magnetic
base you will fi nd a suspension
mechanism
openings to be hung on screws
or nails etc. Please note: The
items supplied do not include
any screws or nails. Get advice
from your specialist stockist on
which fi xings are most suitable
for your purposes!
in the form
EN
of