Handling Precautions - Pioneer VSW-1 Mode D'emploi

Features
1. Quick response
Using the latest circuit technology, this unit
suppresses noises and color distortion even
during sudden switchovers.
2. Automatic switching
Can be combined with a Pioneer DJ mixer for
video switching linked to the fader start mode.
3. Full complement of input/output
connectors
Supports component video, S-Video, and
composite video IN/OUT signals.
(Signals are only input and output; no conversion function
is provided.)

Handling Precautions

Installation location
¶ Do not install above an amplifier or other heat-emitting com-
ponent, or use for long periods near spotlights or other head-
emitting appliances, since the unit may suffer adverse effects.
¶ Install away from tuners and television sets. When placed
near such components, noise and video distortion may occur;
such effects are particularly subject to occurrence when an
internal antenna is used; in such cases, either use an external
antenna, or turn off this unit's power.
¶ The screws on the right and left sides of this unit can be used
to mount the unit in a rack installation or stand. For details,
consult your dealer.
Note:
When installing the unit in a rack or stand, always use the screw
holes provided on the right and left sides of the unit.
Cleaning the Unit
÷ Use a polishing cloth to wipe off dust and dirt.
÷ When the surfaces are very dirty, wipe with a soft cloth dipped
in some neutral cleanser diluted five or six times with water
and wrung out well, then wipe again with a dry cloth. Do not
use furniture wax or cleaners.
÷ Never use thinners, benzene, insecticide sprays or other
chemicals on or near this unit, since these will corrode the
surfaces.
Specifications
1. General
Power ............................ AC 110-120 V/AC 220-240 V, 50/60 Hz
Power consumption ............................................................ 9 W
Operating temperature ....................................... +5°C to +35°C
Storage temperature ......................................... –40°C to +60°C
Operating humidity .............. 5-85 % R.H. (without precipitation)
Weight .............................................................................. 1.4 kg
External dimensions ................. 250 (W) x 88 (D) x 87.5 (H) mm
(not including connectors, buttons and other protruding parts)
2. Video input section (input level/impedance)
Component video ................... BNC connectors x 3 (2 systems)
Y ...................................................................... 1 Vp-p / 75 Ω
............................................................. 0.7 Vp-p / 75 Ω
C /P
B B
............................................................. 0.7 Vp-p / 75 Ω
C /P
R R
S-Video ................................................ S connector (2 systems)
Y ...................................................................... 1 Vp-p / 75 Ω
C ............................................................... 0.286 Vp-p / 75 Ω
Composite video ............................ RCA connector (2 systems)
3. Video output section (output level/impedance)
Component video ..................... BNC connectors x 3 (1 system)
Y ...................................................................... 1 Vp-p / 75 Ω
............................................................. 0.7 Vp-p / 75 Ω
C /P
B B
............................................................. 0.7 Vp-p / 75 Ω
C /P
R R
S-Video .................................................. S connector (1 system)
Y ...................................................................... 1 Vp-p / 75 Ω
C ............................................................... 0.286 Vp-p / 75 Ω
Composite video .............................. RCA connector (1 system)
4. Sync signal output section
Sync output .................................... BNC connector (2 systems)
Supported video modulation systems ....................... NTSC/PAL
5. Other connectors
Control input ................................... minijack (3.5 dia) 2 systems
Control output ................................ minijack (3.5 dia) 2 systems
6. Accessories
¶ BNC cables .......................................................................... 2
¶ Control cables ...................................................................... 2
¶ Operating Instructions ......................................................... 1
For improvement purposes, specifications and design may be
subject to modification without notice.
Features/Specifications
1 Vp-p / 75 Ω
1 Vp-p / 75 Ω
1 Vp-p / 75 Ω
<DRB1375> En
3