Nozzle Attachments; Ending Operation; Emptying The Dust Container - Exquisit BP 6601 bls Mode D'emploi

PLEASE NOTE:
Pay attention to the reach, which
is limited by the cable length.

14.1.1 Nozzle attachments

• You can put the nozzle
attachments both directly
on the connection on the
appliance and on the
suction tube, which is
already installed.
• In order to loosen the
suction tubes, twist them
slightly to pull them off.
Floor nozzle
• The floor nozzle is equipped
with rollers for easier
guidance.
• You can clean smooth
surfaces and carpets with
the floor nozzle.
• With the lever (10) place
the brushes outward or
inward.
• Optimal use depends on
the condition of the floor.
• We recommend the
following use:
 use without brushes:
 For vacuuming carpets with
a high pile
• use with brushes:
 For vacuuming smooth
floors and carpets with a
low pile
Crevice nozzle
• With the crevice nozzle you
can purposefully clean
corners and slots.
Seite | 30
Brush nozzle
• The brush nozzle is
particularly suitable for
vacuum cleaning,
upholstery, curtains or
books.

14.1.2 Ending operation

6
Turn the floor vacuum
cleaner off by using the
On/Off switch and unplug it
from the socket.
7
Let the appliance cool down
completely.
8
If you installed the wall
bracket already, hang the
vacuum cleaner on it.
9
You can attach the crevice
nozzle and the brush nozzle
on the left and on the right
beside the vacuum cleaner.
10
You can wind the mains
cable loosely around the
handle and the dust
container.

14.2 Emptying the dust container

6
Unplug the appliance from
the socket.
7
If necessary, loosen the
suction tube or the nozzle
attachment from the
appliance.
8
Hold the appliance with the
bottom plate of the dust
container over a rubbish
bin.