Radio Wave Indication; Selecting Other Bluetooth Devices From The List; Deleting A Registered Bluetooth Device From The List - Sony DCR-IP55 Mode D'emploi

Overview of the Bluetooth wireless technology
(4) Tap [Info.].
To return Bluetooth Setup screen
Tap [Return].

Radio wave indication

indicates the radio wave status of the connected Bluetooth device. (Use this
indication as a guide.)

Selecting other Bluetooth devices from the list

Tap the Bluetooth device you want to specify in step 4 in on page 20. The device
information is indicated.
Tap [Exit].

Deleting a registered Bluetooth device from the list

You can register up to three Bluetooth devices on your camcorder. When deleting a
Bluetooth device from the list, follow the procedure below.
(1) Open the Network Menu.
24
-GB
The Bluetooth Setup: Self information screen appears.
For details on how to open the Network Menu, refer to "Accessing the
network" in the operating instructions supplied with your camcorder.
The model name
This is the unique address assigned to each
camcorder at the factory. This address is used
when exchanging information between
devices. This address cannot be modified.
(The number indicated on the illustration is
an example number.)