DeLOCK 11827 Mode D'emploi page 3

English
Web Interface / Advanced Configuration
1. You can configure up to 16 different timers. Enable timers, select the timer number, and set the time and day. You can choose 3
different actions: On, Off and toggle. Select "Arm" to enable the timer, and "Repeat" for regular repeating the timer action. Save the
configuration.
2. WiFi configuration: You can change the SSID and password, or the hostname of your device.
3. MQTT (and Domoticz) configuration: Enter the IP address and password of your MQTT server. Please refer to your MQTT server
documentation for details.
4. Logging options: You can configure the log level and syslog settings.
5. Other configuration: You can set a web password (user = admin) and enable or disable the MQTT function. It is strongly advised to set
a password for the device, if you plan to make the device accessible from the internet.
Extra features
Switching via Web command for use with IFTTT or other scripts.
http://delock-XXXX.local/cm?cmnd=Power%20TOGGGLE
http://delock-XXXX.local/cm?cmnd=Power%20On
http://delock-XXXX.local/cm?cmnd=Power%20off
Http://delock-XXXX.local/cm?&user=admin&password=put_password_here&cmnd=Power%20On
Additional button functions
The button provides the following functionalities:
1. 1 x short press: Toggles the relay either directly or by sending a MQTT message.
2. 4 x short press: Starts the Wifi manager providing an Access Point allowing the configuration of WLAN (initial configuration).
3. The LED will blink during the config period. A single button press during this period will abort and restart the device.
4. 5 x short press: Start Wifi Protected Setup (WPS) allowing for SSID and Password configuration using the router's WPS button.
5. The LED will blink during the config period. A single button press during this period will abort and restart the device.
6. 6 x short press: Will restart the device
7. 7 x short press: Start OTA download of firmware. The LED is lit during the update.
8. Pressing the button for over twenty seconds: Reset settings to defaults and restarts the device.
Support Delock
If you have further questions, please contact our customer support support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose, regardless in which way or by any means, electronically or
mechanically, without explicit written approval of Delock.
Edition: 07/2020
-3-