CB ELECTRONICS SR-4 Manuel Utilisateur page 67

Masquer les pouces Voir aussi pour SR-4:
Table des Matières

Publicité

Reconnect Video Frame Reference
to Generateur Chip
Link Generator reference output to
UART
Link Generator reference ouput to
Timeline Lynx ports
CB Electronics RS - 422
U13 to check for tracks on
component side under IC. Verify that
U13 pin 2 is NOT connected to U27
pin 13 or U2 pin 7
Connect U2 pin 7 to U27 pin 13
Connect U27 pin 12 to U13 pin 2
Link U27 pin 12 to required Serial
ports (A..E) pin 5 via individual 100
Ohm Resistor
SR / MR Utilisateur
U13 to check for tracks on
component sider under IC. Verify that
U20 pin 2 is NOT connected to U22
pin 13 or U25 pin 7
Should not be required
Connecte U22 pin 12 to U20 pin2.
Link generator (U22) pin to Serial
ports pin 5 via individual 100 Ohm
resistor.
Page : 67
01/07/2005

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sr-24Sr-32Rm-6

Table des Matières