Operation - Bartscher 114001 Mode D'emploi

Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device only
in case of compliance!
Connect the device only to properly installed single socket with
protective terminal.
Do not disconnect the supply cable by pulling it, always pull the plug.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.2 Operation

•
Connect the device to a single grounded socket.
•
Turn on the device with the use of a lever.
•
Put warm dishes under the heat leakage to keep their temperature. Pay attention to
the distance between the infrared lamp and the dishes. This distance should be
approx. 30 cm.
NOTE!
Only with the right distances the ideal temperature of serving hot meals
without lowering the quality by overcooking can be kept.
•
Separate the device from the mains outlet, when it is no longer used (pull the
mains plug!)
- 22 -