Environmental Notices; Declaration Of Conformity - Auerswald SG-100 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
C2 rated discharge surge
current
5 kV (8/20 μs) Total (I
C2 rated discharge surge
current
5 kV (8/20 μs) per core (l
Protective level core-core
at C2 (U
)
P
Protective level core-PG
at C2 (U
)
P
Serial impedance per core
(0 to 30 MHz)
Cut-off frequency core-core
(100 Ohm) (fG)
Capacity core-core (C)
Capacity core-PG (C)
Pulse reset time
Overload failure mode

Environmental Notices

If you want to dispose of the device, please ensure its professional disposal. Do
not put it in the normal household waste.
Dispose of the packaging material properly and in interest of the
environmental protection.
Consult your responsible authority for information about the
professional and environment-friendly disposal of your device. If you
want that we handle the disposal for you, you can send the device at
your costs to Auerswald GmbH & Co. KG.

Declaration of Conformity

This device complies with the basic health, safety and
environmental requirements in all relevant EU directives. You can
view the Declaration of Conformity on the Internet.
Conditions of Guarantee
1. Auerswald GmbH & Co. KG, Vor den Grashöfen 1, 38162 Cremlingen,
Germany, grants 24 months Manufacturer's Warranty from the date of
purchase, as the manufacturer of this product.
2. For you, as a consumer, this means: We guarantee that our devices are
error-free when supplied. If a manufacturing error is identified within 24 months
of the delivery date we will repair or replace the device free of charge without
you, as the consumer, having to provide the usual legally required proof that this
5 kA
)
n
<= 2.5 kA (operation with wire
terminal)
)
<= 2 kA (operation via RJ45 socket)
n
<= 130 V
<= 230 V
2.4 Ohm +-20%
0 to 100 MHz
<= 10 pF
<= 10 pF
<= 160 ms
Mode 3 (disconnect line)
5 kA
<= 45 V
<= 230 V
3.8 Ohm resistive
+-20% + 100 nF
capacitive
35 kHz to
80 MHz
<= 15 pF
<= 10 pF
<= 160 ms

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sg-200

Table des Matières