Operation; Energy Saving Tips - Coca-Cola F15 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
6

Operation

I
NOTE
 Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the chapter "Cleaning
and maintenance" on page 14).
 A few water drops may form inside the cooler if it has been
cooling for a lengthy period. This is normal because the mois-
ture in the air condenses to water when the temperature in the
cooler falls. The cooler is not defective. Wipe it out with a dry
cloth if necessary.
6.1

Energy saving tips

 Choose a well ventilated location which is protected from direct sunlight.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler device, use the device's ECO mode.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooling device open for longer than necessary.
12
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

F25Cool can 10

Table des Matières