Bio-Sauna Setting In Automatic Mode - Teuco ARJA Manuel De L'utilisateur

EN
Parameter modification options:
• temperature set-point for the sauna (from 40 °C
to 110 °C) in increments of 5 °C;
• humidity set-point for the sauna (from 30% to
100%) in increments of 10%;
• sauna function duration (h:mm format).
h: values in the interval 0÷6 hours. 1-hour
increment setting;
mm: values in the lower interval 0÷55. 5-min.
increment setting.
When one of the four parameters is selected, it
may be modified within allowed values, through
the keys and
You exit the INACTIVE SAUNA screen when:
• keys are not pressed for 5"; Any modification,
even partial, is not saved and keypad enters the
"READY" or "FUNC.ON" state;
• key pressing entailing:
- saving of parameters displayed (duration,
temperature and humidity);
- prompt activation of function; the SAUNA key
becomes steady LIGHT BLUE on (see sauna
mode activated). The keypad passes to ongo-
ing sauna screen visualization:
- MAN;
- Current temperature in sauna;
- current humidity
- Sauna functioning time counter (the counter
decreases during functioning).

BIO-SAUNA SETTING IN AUTOMATIC MODE

In this state, it is possible to set the sauna function
activation at a pre-set time and duration. The follow-
ing actions must be carried out:
• set the temperature set-point for the sauna
(from 40 °C to 110 °C) in increments of 5 °C;
• set the humidity value for the sauna (from 30%
to 100%) in increments of 10%;
• set the function activation time (format hh:mm
with increments of 5 minutes);
• set the function switching off time (format hh:mm
with increments of 5 minutes).
The max. duration must be restricted to 6 hours.
22
.
5sec.