Basic Operation; Main Screen - ELEVEN Head Rush Pedalboard Guide D'utilisation Rapide

Basic Operation

This chapter describes some of HeadRush Pedalboard's basic functions. You can visit
download the complete user guide for even more information.

Main Screen

Tap to view setlists.
Turn encoder to move
through selectable
items onscreen or to
adjust parameters.
Press encoder as an
Enter command.
Double-tap a model,
In, or Out to show its
parameters.
Tap its footswitch to
activate or deactivate it.
Important: The sequence of models in your signal chain is not necessarily reflected in the footswitches. You can
freely assign models to available footswitches without changing your signal chain at all—and vice versa. See
Hardware Assign to learn about this.
To assign a model (amp, cab, or effect) to an empty slot, tap it ( ) and then use the list
that appears. See Rigs > Creating a Rig
To show a model's parameters on the right edge of the screen, tap the model so it is
outlined in green. You can then turn the parameter knobs to adjust the parameters to
their left. Tap anywhere in the column of those three parameters to show the next three (if
the model has more than three parameters).
When no model is selected, these parameters will be ones that you assign in the
Hardware Assign screen.
To show a model's settings screen, double-tap it. Its settings screen will appear with
its preset menu, parameters, and assigned color.
To activate or deactivate a model, press the footswitch assigned to it, or tap the
model's footswitch in the display.
To load another rig (preset):
•
Press the upper-left (Rig
or next rig immediately.
•
Tap the or
•
Tap the name of the rig on the screen and then turn the encoder.
To view other options, tap the
Tap and drag this bar downward to view list of rigs.
to learn about this.
) or lower-left (Rig
next to the name of the current rig on the screen.
button in the upper-right corner, and then tap an option.
Rig name.
Turn the parameter knobs to adjust these parameters. When a model is
selected, tap anywhere in this column to show the next three parameters.
) footswitch to load the previous
headrushfx.com
Tap to save rig.
Tap for more options.
To rearrange the
models in your signal
chain, tap and drag a
model to another slot
or between two other
models (the ones after
that position will shift
one slot further down
the signal chain).
to
7