Features - Clarion XH5210 Mode D'emploi Et Manuel D'installation

1. FEATURES

The Clarion XH510, XH5410 and XH7110 amplifiers fit a variety of system
configurations and provide these features:
• IVS - Input Voltage Selector with three sensitivity ranges on the gain control for
the ability to connect to almost any source.
• PFS - Precise Frequency Selector, a detented crossover frequency adjustment.
• Ground loop isolation for RCA inputs.
• Full frequency response with low distortion and exceptional signal-to-noise
performance.
• Advanced circuitry design provides bridgeable outputs for use in a variety of
applications.
• Independent electronic crossovers to aid in audio system design.
The XH7110 has 4dB per octave slope and full adjustment range from 0Hz to
50Hz.
The XH510 and XH5410 have 1dB per octave slope and full adjustment range from
50Hz to 550Hz.
• Bass boost circuit on XH series amps to reinforce low frequency signals.
• Remote turn-on with "soft start" muting to prevent turn-on "thump".
• Protection circuits for overheating and speaker shorts.
• XH510 and XH5410 are -Ohm load capable of driving a variety of speaker systems.
• Gold-plated input/output connectors and on-board automotive-type fuses.
• Aluminum heat sink for efficient heat dissipation.
• SLI - Speaker Level Inputs on amps for integration with factory sound systems.
• Low profile, compact footprint to accommodate space limitations.
• SSF - Adjustable subsonic filter on the XH7110 can be turned down to 10Hz.
4
XH510/XH5410/XH7110