Installation And Wiring; What Is Included In The Box; Mounting Precautions - Clarion XH5210 Mode D'emploi Et Manuel D'installation

5. INSTALLATION AND WIRING

Read these instructions and the following precautions carefully.

What is included in the box

In addition to this manual, the box contains:
• Amplifier
• High-level speaker input harness

Mounting precautions

If you lack the necessary skills, do not install the amplifier yourself. See your
authorized Clarion Dealer for installation recommendations.
• This unit is exclusively for vehicles with a negative ground, 1V power supply.
• This unit requires additional mobile audio components for proper operation.
• Choose a location in the vehicle that provides adequate ventilation around the
amplifier. Although any moving air dissipates heat, cool air should run along the
length of the fins rather than across them.
Although Clarion amplifiers include heat sinks and protection
circuits, mounting an amplifier in a tight space without any air
movement will reduce performance and damage the unit's internal
circuitry over time.
The XH7110 does not have a fan. Install it such that air can flow to
the bottom of the amplifier.
• Mount the amplifier on a firm, flat surface away from subwoofer enclosures or to
any area that is prone to vibration. Do not install the amplifier on plastic or on any
other combustible material.
• For easy system setup, mount the amplifier so that the adjustment controls are
accessible after installation.
10
XH510/XH5410/XH7110
CAUTION