EXALTA EL-050 Manuel D'instruction page 12

Use original accessories only.
When hairdryer is working, its air inlets and outlets must never be closed.
The product must not be absolutely plunged in water or other liquids or
coming in contact with them! Never use the appliance with wet or moist hands.
In case the appliance becomes moist or wet , please unplug it immediately
from the socket.
DO NOT TRY TO REACH THE PRODUCT INTOWATER!
Use the device only for its intended purpose
In order to avoid possible fires and damages to the product, never use and
place the product under blankets, towels or cushions.
In order to avoid the product from possible overheating, it is advisable, to
unwind completely the cable and not to keep the product switched on if
it is not in use.
If the item is used in bathroom, unplug it after use since the proximity of
water presents an hazard even when the item is switched off.
Attention: the nozzle becomes hot during operation.
OPERATING INSTRUCTIONS
Fully unwind the cable.
Switch on the appliance and select the desired air intensity and
temperature.
Select the desired temperature
Position I : cold air
Position II : medium temperature for gentle drying and shaping
Position III : high temperature for rapid drying
Select the desired blowing strength
Position 0 : power OFF
Position : gentle intensity of air
Position : strong intensity of air
COOL-SHOT
By this switch it is possible to interrupt the heating process so that the air
can be mixed according to individual requirements. Upon releasing this
switch, the appliance will operate again at the preset temperature.
12