Ec Declaration Of Conformity - Tonino Lamborghini PB 43B TL Traduction Du Mode D'emploi D'origine

14. RATINGS
Petrol Brushcutter
Engine output
Engine type
Cubic capacity
Fuel
Tank volume
Maximum engine speed
Idling speed
Max. speed of the cutting tool
With 3-point blade
With line cutter head
Fuel consumption
Cutting diameter
Cord diameter
Overall cord length
Cord extension
Weight 1)
Noise level
Vibration 2)
(EN ISO 11806:2011)
Vibration 3)
(EN ISO 11806:2011)
1) Weight as per standard ISO 11806-1 (without fuel, cutting devices and harness)
2) With 3-point blade
3) With line cutter head
Technical changes reserved.
The devices are manufactured in accordance with the provisions of EN ISO 11806-1 and fully comply with the provisions
of the German Product Safety Act.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require
noise protection (e.g. wearing of ear protectors).
Please do also consider any local regulations concerning noise protection!
We, ikra GmbH, Schlesierstraße 36, D-64839 Münster, declare under our sole responsibility that the petrol
brushcutter PB 43B TL / PB 43L TL, to which this declaration relates correspond to the relevant basic safety
and health requirements of Directives 2006/42/EC (Guideline of Machines), 2014/30/EU (EMC-Guideline), 97/68/
EC as amended by 2004/26/EC emmission directive, annex IV and 2000/14/EC (noise directive). For the relevant
implementation of the safety and health requirements mentioned in the Directives, the following standards and/or
technical specification(s) have been respected:
EN ISO 11806-1:2011; ZEK 01.4-08/11.11; EN ISO 14982:2009
measured acoustic capacity level
guaranteed acoustic capacity level
Conformity assessment method to annex V / Directive 2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally retrieved via the consecutive serial number.
Münster, 21.04.2016
Maintenance of technical documentation: Gerhard Knorr, Kärcherstraße 57, DE-64839 Münster
GB | Operating Instruction
kW
cm³
lubricated petrol
ml
-1
min
-1
min
-1
min
-1
min
kg/h
cm
mm
m
kg
dB (A)
m/s²
m/s²

14. EC DECLARATION OF CONFORMITY

106,9
114,0 dB(A)
Gerhard Knorr, Technical Management Ikra GmbH
PB 43B TL / PB 43L TL
1,25
2-stroke air-cooled
42,7
40:1
1000
9300
3000
6900
6400
0,63
43 (Blade = 25,5)
2,4
2 x 4
Tap'n go
7,7
95,4
12,479
4,692
dB(A)
GB-13
[K 3,0 dB(A)]
2
[K 1,5 m/s ]
2
[K 1,5 m/s ]