Quick Installation Guide - U.S.Robotics R24.0506.00 Guide D'installation

Quick Installation Guide

Package Contents:
USR5461 Wireless MAXg Router
Quick Installation Guide
One (1) Ethernet cable
Connecting the Wireless MAXg Router
Note: For the most updated information, visit: http://www.usr.com/support
You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more
detailed information.
ATTENTION: If you are installing the Wireless MAXg Router and a Wireless MAXg PC
!
Card, PCI Adapter, or USB Adapter at the same time, refer to the Installation Guide
for the Wireless MAXg PC Card, PCI Adapter, or USB Adapter for combined installa-
tion instructions. Do not perform the installation steps in this guide.
Step One: Connect the Wireless MAXg Router
I. Turn off your computer and your cable or DSL modem. Disconnect
the Ethernet cable from the Network Interface Card (NIC) of your
computer, but leave it connected to your cable or DSL modem.
II. Connect the Ethernet cable from your cable or DSL modem or network connection to the
WAN port of the Wireless MAXg Router.
III. Connect an Ethernet cable to the Network Interface Card (NIC) of your computer and to one
of the LAN ports of the Wireless MAXg Router.
Connect the antenna to the Wireless MAXg Router.
IV.
Connect the power adapter to the Wireless MAXg Router and to a standard wall power out-
V.
let. Make sure your computer is turned on.
Note to UK Users: Attach the correct power plug to the power adapter.
5VDC power supply
Installation CD-ROM which includes User Guide
Detachable antenna
1