Free Room; Installation - Daikin Zanotti AS Série Notice De Mode D'emploi Et D'entretien

6.4 Free room

When installing the unit leave enough free room to allow opening, correct use and easy
maintenance in safe conditions.

6.5 Installation

Prepare an opening with suitable dimensions in the cold room wall (see picture).
Condensate drain
line D (I)
AS235
AS335
AS340
A) Position the unit on the cold room inserting the evaporator section in the opening.
B) Fix the unit using the screws supplied.
D) Fit a drain line to the defrost water drain connection in the lower part of the condensing
unit.
A B C
857 470 440
857 470 440
857 495 495
C) Fit the baffle as shown in the picture
Inject silicone seal all around
the the panel opening
D E F
120 580 480
120 580 480
120 630 580
Hole
G H
1130 100 18
1600 100 22
1640 100 22
I
22