Renkforce 1267653 Notice D'emploi page 35

• Briefly push the „TIME" button. The hours of the time flash. Set them with the buttons
„UP" and „DOWN/DCF".
• Briefly push the „TIME" button. The minutes of the time flash. Set them with the buttons
„UP" and „DOWN/DCF". Each push of a button will also automatically reset the seconds
to „00".
• Briefly push the „TIME" button. The year flashes. Set it with the buttons „UP" and
„DOWN/DCF".
• Briefly push the „TIME" button. The month flashes. Set it with the buttons „UP" and
„DOWN/DCF".
• Briefly push the „TIME" button. The date flashes. Set it with the buttons „UP" and
„DOWN/DCF".
• Briefly push the „TIME" button. The language for the weekday abbreviation flashes.
Set the language with the buttons „UP" and „DOWN/DCF".
GE = German
EN = English
IT = Italian
FR = French
NE = Dutch
ES = Spanish
DA = Danish
• Briefly push the button „TIME" to leave setting mode.
Independently of the settings made, the radio tower symbol for DCF reception flashes
at the upper right of the display. This also applies if you have only changed the time
zone, but not time or date.
Then proceed as described in chapter 9. a). The settings for the time zone and the
language for displaying the week day are retained.
35