Finding A Suitable Location - Werner WH2200 Série Instructions D'installation

Échelle de grenier en bois
Masquer les pouces Voir aussi pour WH2200 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section 1.3

FINDING A SUITABLE LOCATION

Before Proceeding: You must have: a suitable ceiling and joist structure, tools and materials
Goal:
To nd a location free of hazards and
obstructions that will provide room for the
installation and use of the attic ladder.
Avoid installing attic ladder over other stairs.
Step 1. Pick a potential location for installation.
Check that the size of rough opening matches
what is listed in Table 1 for the model being
installed.
Step 2. If there is no ceiling and the attic ladder will
t between the joists so that no joists need to
be cut, go to Section 1.6, page 13, "FRAMING
THE ROUGH OPENING" . If there is no ceiling,
but one or more joists need to be cut, go to
Section 1.5, page 12, "CUTTING THE CEILING
JOISTS" . If there is a ceiling at this location, you
will need to inspect the area above this location
as described in steps 3 and 4.
Step 3. Go into the overhead space and nd the area above your chosen location.
This area may be located by:
A) Listening for tapping from below
B) Measuring distances from walls or other objects common to the overhead space and
the room below.
WARNING
Do not drive metal nails or other
conductive objects into the ceiling
unless you are sure they will not
contact electric wires. Contact with an
electric wire can be deadly.
needed, and a level at location in the ceiling.
Model #*
WH2208
WH2210
WH2508
WH2510
WH3008
WH3010
*Products sold in Canada will have model numbers ending in "CA".
LS
Rough
Ceiling Height Range
Opening
WH Series (Load Rating: 350lbs./159 kg)
22 ½" x 54"
84" - 105"
(0.57 m x 1.37 m)
(2.30 m x 2.67 m)
22 ½" x 54"
105" - 124"
(0.57 m x 1.37 m)
(2.67 m x 3.15 m)
25" x 54"
84" - 105"
(0.64 m x 1.37 m)
(2.30 m x 2.67 m)
25" x 54"
105" - 124"
(0.64 m x 1.37 m)
(2.67 m x 3.15 m)
30 ½" x 54"
84" - 105"
(0.77 m x 1.37 m)
(2.30 m x 2.67 m)
30 ½" x 54"
105" - 124"
(0.77 m x 1.37 m)
(2.67 m x 3.15 m)
FC
Description:
SC
FC - Floor to
ceiling height
SC - Swing
clearance
LS - Landing
space
* Recommended
spacing to climb
ladder
2' *
FIGURE 3
Landing
Space
(FC)
(LS)
56"
(1.42 m)
(1.57 m)
64"
(1.63 m)
(1.83 m)
56"
(1.42 m)
(1.57 m)
64"
(1.63 m)
(1.83 m)
56"
(1.42 m)
(1.57 m)
64"
(1.63 m)
Swing
Clearance
(SC)
62"
72"
62"
72"
62"
72"
(1.83 m)
TABLE 1
9

Publicité

Table des Matières
loading

Table des Matières