Residual Heat Indication; Automatic Cooking; Control Panel Locking - Xolid XEKC50601-5 Instructions D'utilisation Et D'installation

Residual heat indication

After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on,don't touch the heating zone and don't put any heat
sensitive object on them. There are risks of burn and fire.

Automatic cooking

All the cooking zones are equipped with an automatic "go and stop" cooking device. The
cooking zone starts at full power during a certain time, then reduces automatically its power on
the preselected level.
•
Start-up :
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
•
Switching off the automatic cooking :
Action
Zone selection
(for example « 7 »)
Power level selection

Control panel locking

To avoid modifying a setting of cooking zones, in particular with within the framework of
cleaning the control panel can be locked (with exception to the On/Off key [
• Locking
Action
Start
Hob locking
• Unlocking
Action
Start
In the 5 seconds after start :
Unlocking the hob
Control panel
press key [ + ]
press key [ + ]
repress key [ + ]
press key [ - ]
Control panel
press key [ + ]
press key [ - ] or [ + ]
Control panel
O/I
Press [ ]
Press simultaneously [ - ]
and [ + ] at front left
Press key [ + ]
Control panel
O/I
Press key [ ]
Press simultaneously [ - ]
and [ + ] at left
Press key [ - ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] wents to [ 8 ] [ 7 ]
[ 7 ] is blinking with [ A ]
Display
[ 7 ] is blinking with [ A ]
Level selected
Display
[ 0 ] or [ H ] on 4 displays
No modification
[ L ] on 4 displays
Display
[ L ] on 4 displays
[ 0 ] or [ H ]
No light on the displays
20
O/I
]).