Pan Detection; Residual Heat Indication; Booster And Double Booster Function - Xolid XEKI506051-4-5FLEX Instructions D'utilisation Et D'installation

•
Start up / switch off a heating zone:
Action
Zone selection
on
To set
(adjust the power)
To stop
If no action is made within 20 second the electronics returns in waiting position.

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don't let the pan detection [ U ] active.

Residual heat indication

After swittching off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.

Booster and Double Booster function

The Power function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 5 minutes with an ultra high power.
Power is foreseen for example to heat up rapidly big quantities of water, like nuddles
• Start up / Stop the booster Power function:
Action
Zone selection
Start up the Booster
Stop the Booster
• Start up / Stop the double booster function:
Action
Zone selection
Start up the Booster
Start up the Double Booster
Stop the Double Booster
Control panel
Press [ 0 ] of the selected zone
Slide on the "SLIDER"
to the right or to the left
Slide to [ 0 ] on "SLIDER"
or press on [ 0 ]
Control panel
Press key [ 0 ] from the zone
Press key [ ]
Slide on the "SLIDER"
Or press [ P ]
Control panel
Press key [ 0 ] from the zone
Press key [ ]
Re-press key [ P ]
Slide on the "SLIDER"
Or press [ ]
32
Display
[ 0 ] and control light
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]
Display
[ 0 ] and control light on
[ P ] during 5 min
[ P ] to [ 0 ]
[ 9 ]
Display
[ 0 ] and control light on
[ P ]
[ ]
[ P ] to [ 0 ]
[ 9 ]