Assembly And Disassembly Of The System; Assembling The Cleaning Tool; Connecting The Rods - Wohler 24471 Mode D'emploi

6

Assembly and disassembly of the system

6.1 Assembling the
cleaning tool
Fig. 26: Assembling the cleaning tool
6.2

Connecting the rods

Fig. 27: Connecting the rods
Assembly and disassembly of the system
• Slide the male connector of the cleaning tool
into the female connector of the rod. The tabs
of the plug must be inserted into the holes of
the sleeve until they engage.
Connect the rods in the same way.
•
EN
25