Eurotops BK514 Mode D'emploi page 5

Recording video
To take a video

Turn on the recorder if it is off.

The object should be more than 50cm away from the camera in order to ensure a good quality.

Press button (4) once. The indicator (7) will flash blue 3 times.

Video is being recorded. During the recording, the indicator (7) will not light up.

To check recording status
Press button (4) or button (6) once. The indicator (7) will flash blue 3 times indicating recording in
progress.
To stop recording
Press button (4) once. The indicator (7) will flash blue 3 times. During the 3 flashes, press button (4) again.
The blue indicator becomes stable.
Footage is recorded and saved.
It is in stand by mode when the indicator (7) turns blue.
Auto Power off
After the watch is turned on, it enters stand-by mode.
Note: If there is not enough memory or no battery power, the watch will save the currently recording audio
or video first, the indicator (7) will flash red and blue together. Then the watch will power off after 5 seconds
automatically.
Note: If the watch doesn't respond to any operation, press the photo key (6) and the power key (4) at the
same time to reset the watch. The indicator (7) will go out.
Connect to the PC/MAC
Turn on the watch.
Connect the watch to your computer with the USB cable provided.
For PC
Windows will recognize the watch and install the driver.
Go to "My Computer" after the installation is completed.
A new device with removable storage displays.
Double click on the new device.
Recorded files are stored in this directory and will be ready for viewing and editing.
For MAC
The device should automatically appear on your Desktop Screen.
Double click on the new device.
Recorded files are stored in this directory and will be ready for viewing and editing.
Note: This device will automatically recharge battery power once connected to the computer.
Set recorder clock (For PC only)
Open the new device, find the text document with the file name as: TAG
Modify the date and the time as: yyyy-mm-dd hh:ii:ss. (For example, if the date is October 15, 2012 and the
time is 13:30:29, type: 2012-10-15 13:30:29).
Save and close it.
Unplug the watch and turn it off.
Battery charging
This device can be charged through a USB port of a computer. The blue and red indicators are flashing.
When the battery is fully recharged, the red light will stop flashing.
5