Functional Description; Button Functions - Auto-T 540120 Mode D'emploi

Instructions for use
Please read the instructions carefully before use and keep in a safe place for future reference.
Although the telephone is an unparalleled means of communication and an extremely useful
one, the use of a hands free kit will reduce your concentration on your driving. We advise you
to use the hands free kit only in cases of emergency.

Functional description

1. Hands free kit
2. FM transmitter
3. Smartphone stand
4. USB charger
Connect the audio source of the smartphone to the FM transmitter via the auxiliary cable and
tune the FM channel to your PREMIUM stand's channel to receive transmissions via the FM
radio.
Sound from the smartphone is output through the car's stereo system. The USB charging
interface makes it possible to charge mobile phones, MP3 players, SatNavs and other compa-
tible products via a USB cable.
Functions and characteristics
• Frequency range: 88.1 MHz-107.9 MHz
• The 3.5 inch LCD screen displays the frequency
• Precise definition of the choice of frequency in units of 0.1 MHz or quick frequency selection
• 4 pre-set channels: 88.1, 95.5, 99.7, 107.9
• Selects the last frequency, track number and volume settings used when switched on.
• Hands-free function: voice is output by the car's audio system (sound connected to the FM
transmitter from the telephone's 3.5 mm stereo headphone Jack socket). If your telephone
is not compatible with a 3.5 mm hands free kit, it may not be used with this unit.
• Transmission is automatically stopped if there is no audio signal for 60 seconds.
• Infrared remote control
• Wireless/Bluetooth ear-piece
• 5 V DC 1.5 A USB in-car charger
• Not suitable for appliances less than 55 mm or greater than 80 mm wide.

Button functions

QS button: press briefly to adjust pre-programmed channels. Press and hold the QS button
for 3 seconds to set the current channel as a pre-programmed frequency (pre-programmed
frequencies may be adjusted during use).
CH up button: press briefly to increase the frequency by 0.1 MHz or press and hold to in-
crease the frequency quickly.
CH down button: press briefly to decrease the frequency by 0.1 MHz, press and hold to
decrease the frequency quickly.
English
Answer button: when the telephone is in standby or line in mode, press briefly to answer a
call. When the telephone is in conversation mode, press briefly to hang up (the frequency of
the FM transmitter and the appliance's frequency must be identical).
"Power" button: On/off
Charging function: USB charging interface maximum output: 5 V 1500 mA
Instructions for use
1. Insert the device into the car's cigar lighter, put your appliance on the stand and lock it in
place.
2. Connect the auxiliary cable to the 3.5 mm stereo headphone Jack socket, set the PREMIUM
stand's transmission frequency to a frequency between 88.1 and 107.9 MHz and set the car's
FM channel to the same frequency as the PREMIUM stand, in order to be able to listen to
music stored on your telephone via the car's FM radio.
3. When the phone is in standby mode or when it is playing music, you can take a call by
pressing the appliance's answer button (currently compatible with mobiles equipped with
the "drive-by-wire" function). If you do not want the call to be broadcast via the car's audio
system, you can use the ear-piece supplied with the stand. At the same time, mute or lower
the volume from the car's audio system: the transmitter stops operating when you use the
ear-piece to answer a call.
4. If you wish to charge your mobile phone, first connect the USB cable to the appliance's USB
interface and to the mobile. The telephone automatically detects the connection to the USB
port and starts charging.
Hands free kit function and use of the wireless ear-piece (Bluetooth)
Voice is transmitted via the car audio system when the wireless ear-piece is connected to the
kit. Voice is automatically transmitted via the wireless ear-piece when it is separated from the
unit.
The Bluetooth ear-piece must be charged in order for it to be usable. When using for the first
time, power up the kit by connecting to the cigar lighter and charge the ear-piece without
disconnecting it for at least one hour.
Notes
1. It is normal for the charger to become warm during charging. Once the battery is fully char-
ged, the temperature will gradually return to normal.
2. For the charger to operate at optimum capacity, use it at a temperature of between 0 and
40°C.
3. Remember to disconnect it from the power supply when charging is complete.
WARNING
1. Only appliances with a USB interface may be charged. Charging devices equipped with
English