NAD L56 Manuel D'installation page 25

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STOPPING PLAY
Press STOP during playback.
RESUME PLAY
• When play is stopped, the unit records the point where STOP was
pressed (RESUME function).
Press PLAY and play will resume from this point.
• The RESUME function works only with discs for which the elapsed
playing time appears on the window display during playback.
NOTES
• Resume function will be cleared when the power is turned off and
then on.
• Opening the disc tray cancels Resume function.
• The Resume function may not be available on some DVD discs.
• If the player is left in the stop mode for more than 8 minutes, the
power shuts off automatically.
STILL PICTURE (PAUSE)
Press PAUSE/STEP during playback.
• DVD The player will be placed in the still picture mode.
• CD The player will be placed in the pause mode.
FRAME ADVANCE (DVD ONLY)
Press PAUSE/STEP during still playback.
(Each time you press PAUSE/STEP, the picture advance one frame)
To resume normal playback, press PLAY.
SKIPPING FORWARD OR BACK
Skipping forward Press SKIP
or a track (CD) is skipped each time the button is pressed.
Skipping back Press SKIP
during playback. When the button is
pressed once midway through a chapter/track, the player returns to
the start of that chapter/track. When it is pressed again, a
chapter/track is skipped each time the button is pressed.
NOTE
When SKIP/SCAN button is pressed and held for more than 0.5
second, scan function will engage.
during playback. A chapter (DVD)
Basic Operation
BASIC PLAYBACK
25
GB

Publicité

Table des Matières
loading

Table des Matières