Fixing In The Niche; Sound-Proofing Seals; Balancing The Door (Left And Right) - Brandt VH900WE1 Guide D'installation

EN
2 / INSTALLING YOUR DISHWASHER

• FIXING IN THE NICHE

Fasten the dishwasher under the worktop
P9
with the screws
flanges you have unfolded (Fig. 3.2).
Warning:
The screw provided is intended for a
panel at least 16mm thick. If the panel is less
than 16mm thick, change the screw or shor-
ten it.

• SOUND-PROOFING SEALS

To improve the built-in appliance's sound-
proofing, fit the sound-proofing seals (depen-
ding on the model). (
If the recess is bigger, stick on seal
the adhesives provided.
If the appliance is laterally secured, a cut must
be made in the seals'
retaining brackets to be passed through (nip-
per).
• BALANCING THE DOOR (LEFT
AND RIGHT)
Adjust the tension on the springs, if neces-
sary, to compensate for the weight of the clad-
ding panel. Adjust them identically on the right
and the left (Fig. 9).
The door is correctly balanced when it dopes
not fall heavily on opening and it remains hori-
zontal in the open position.
(see Fig. 7) or using the
P6 P11
on Fig. 8)
P6
P6
heels to allow the
Fig. 7
using
Fig. 8
Fig. 9
22