Logitech RALLY Guide D'installation page 8

PAIRING A REMOTE CONTROL
TO RALLY
RALLY and the remote control are
paired at the factory You can pair
up to 5 remote controls to RALLY to
make it easier to control the system
in larger rooms Or, if you need to pair
a remote to the camera, such as when
replacing a lost remote, do the following:
1. Press and hold the button on
the camera until the LED flashes
2. Press and hold the button on
the Display Hub until the LED flashes
3. Press and hold the Bluetooth button
on the remote control until the LEDs
on both the camera and Display Hub
stop flashing
4. If the pairing fails, repeat from step 1
8 English
CAMERA SETTINGS
APPLICATION
Use this program to control the camera
pan, tilt, zoom, focus, and image quality
(like brightness and contrast) from
your computer The software can be
downloaded from www logitech com/
support/Rally