Charge The Battery; Technical Support - Kensington KeyFolio Pro 2 Guide De Démarrage Rapide

Masquer les pouces Voir aussi pour KeyFolio Pro 2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
6
Select Bluetooth keyboard.
7
Follow pairing directions.
Note the following about the Bluetooth connection between the keyboard and your tablet:
• If the devices are connected and you turn the Keyboard off, the devices are still
connected when you turn the Keyboard back on. You can simply begin typing to
use the Keyboard.
• Likewise, if the devices are connected and you turn your tablet off, the devices are still
connected when you turn your tablet back on. You can simply begin typing to use the
Keyboard.
• If the devices are connected and you turn Bluetooth off on your tablet, when you turn
Bluetooth back on, you need to connect the devices again by following the steps above.
NOTE: If the Keyboard sits idle for 15 minutes when it is connected to your tablet, the
Keyboard goes into a dormant state, and the Power Indicator Light turns off. To wake up
the Keyboard, press and hold the Connect Button for 3 seconds.

Charge the Battery

When the Charging Indicator Light is blinking, you need to charge the Keyboard battery.
1
Insert the small end of the Charging Cable into the micro USB Charging Connector on
the Keyboard.
2
Insert the other end of the Charging Cable into your a USB port on your computer.
The Charging Indicator Light glows red.
NOTE: You can also insert the other end of the Charging Cable into a USB charger
adapter, and then plug the adapter into a working outlet.
3
When the Keyboard is fully charged, the Charging Indicator Light turns off.
4
Troubleshooting
I can't connect the Keyboard to my tablet.
Try the following in sequence. You can stop when the problem is fixed.
1
Make sure you have installed and set up Bluetooth correctly on your tablet. Check the
documentation that came with your tablet for instructions.
2
Make sure that the Keyboard is within range of your tablet. Maximum Bluetooth range
is about 10 meters/33 feet.
3
If your tablet is connected to other Bluetooth devices, you may need to disconnect
some devices before you can connect to the Keyboard.
4
If you changed any Bluetooth settings on your tablet, try connecting the Keyboard to
your tablet again.
5
Make sure that both your tablet battery and the Keyboard battery are sufficiently
charged.
If this does not solve the problem, please contact Kensington Support at kensington.com.

Technical Support

Technical support is available to all registered users of Kensington products. Technical
Support contact information can be found on the back page of this manual.
Web Support
You may find the answer to your problem in the Frequently Asked Questions (FAQ) section
of the Support area on the Kensington Website: www.support.kensington.com.
Telephone Support
There is no charge for technical support except long-distance charges where applicable.
Please visit www.kensington.com for telephone support hours. In Europe, technical
support is available by telephone Monday to Friday 09:00 to 21:00 (Central European time).
Please note the following when calling support:
• Call from a phone where you have access to your device.
• Be prepared to provide the following information:
– Name, address, and telephone number
– Name of the Kensington product
– Make and model of your computer
– System software and version
– Symptoms of the problem and what led to them
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Keyfolio pro

Table des Matières