IOGear GWU637 Manuel Utilisateur page 13

15. The adapter will reboot for 90 seconds. During the reboot process, the Wireless
Connection status will change to ACTIVE.
16. Close your browser and change the network settings on your computer back to
DHCP. Refer to steps 4 through 8.
17. Your Ethernet-2-WiFi adapter configuration is complete. Use the included
Ethernet cable to connect the adapter to your Ethernet enabled device such as
a Blu-Ray player, HDTV or game console.
Note: Make sure to set your Ethernet device's network connection setting to WIRED
for proper operation.
Home Network
13