Dell FC8PT Guide Rapide De Démarrage page 8

Table 1-1. Port Status LED – Emulex (continued)
Yellow LED
On
2 fast blinks
3 fast blinks
4 fast blinks
Off
Slow blink
Fast blink
Flashing
Table 1-2. Port Status LED – QLogic
Yellow LED
Off
On
Flash
Off
Off
Flash
Table 1-3. Pass-Through Module Status LEDs
Green LED
Off
On
On
On
On
8
FC8PT Pass-Through Module
Green LED
On
On
On
On
Slow blink
Slow blink
Slow blink
Slow blink
Green LED
Off
On
Flash
On
Flash
Off
Yellow/Blue LED
Off
On (blue)
Blinking (yellow)
Off
Blinking (blue)
State
Failure while functioning
2-Gb link rate – normal link up
4-Gb link rate – normal link up
8-Gb link rate – normal link up
Normal link down or not started
Off-line for download
Restricted off-line mode (waiting for restart)
Restricted off-line mode (test active)
State
Power off
Power on (before firmware initialization)
Firmware fault
Link up
Activity
Beacon
State
The pass-through module is powered off or
an error condition exists
The pass-through module is healthy
Pass-through module fault
Booting up
Chassis Management Controller identifies
pass-through module