CAPTELEC MD2200 - T 2020 Manuel D'utilisation page 49

When new batteries are installed
1. "YEAR" will blink on display automatically.
2. Press [+/M] to select current Year.
] button to confirm and "MONTH" will display.
3. Press [
4. Press [+/M] to select current Month.
] button to confirm and "DAY" will display.
5. Press [
6. Press [+/M] to select current Day.
] button to confirm and "HOUR" will display.
7. Press [
8. Press [+/M] to select current Hour.
] button to confirm and "MINUTE" will display.
9. Press [
10. Press [+/M] to select current Minute.
11. Press [ ] button to confirm and clock setting is done.
12. The set date and time will be displayed.
At any time
1. [ ] button to when the device is off.
2. Date and time will be displayed.
] button for 3 seconds and "YEAR" will blink.
3. Press and hold [
4. Follow the same procedure above to set clock.
TO SET CLOCK
49