Stainless Smoke Deflector Installation - Regency Classic I2405M Manuel D'installation

Foyer encastrable au bois
Masquer les pouces Voir aussi pour Classic I2405M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

installation
10 |
STAINLESS STEEL SMOKE DEFLECTOR INSTALLATION
The stainless smoke deflector is located in the upper front area of the firebox. The deflector is held in place with 2 bolts
Prior to the first fire, ensure deflector is seated properly and secured with 2 hand tightened bolts.
Smoke deflector
Smoke deflector is installed through the door
opening in location shown in diagram
To replace the deflector, loosen off both bolts and slide defector upward and out. Install new defector and hand tighten bolts. Ensure positive location of
the defector prior to hand tightening.
WARNING: Operation of the unit with out proper installation of smoke deflector will void warranty.
10 | I2405
Ensure defector is seated so bolts are situated
at the top of the keyhole before tightening.
Smoke deflector installed with 2 bolts.
Note: This is a view from the back of the unit
through the top.

Publicité

Chapitres

Table des Matières
loading

Table des Matières