TEFAL Avanti Elite Guide De L'utilisateur page 9

Defrost function
For toasting frozen bread, press the defrost
button: the defrost symbol will appear on
the screen - Fig. 10
Select the desired toasting level and press
the bread control lever down. Extra time for
toasting will automatically be selected in
order to defrost and then toast your bread.
Once the cycle is engaged the remaining
toasting time will appear on the display.
At the end of the cycle, the bread will pop
up and the toaster will switch off.
Leave the bread in the slots for approximately
30 seconds before removing it.
Reheat function
For reheating toast (short fixed time), press
the "reheat" button: the reheat symbol will
appear on the display - Fig.
Press the bread control lever down (you
don't need to select a toasting level). The
appliance will operate for a preset period
of time and will show the remaining
toasting time on the screen.
At the end of the cycle, the bread will pop
up and the toaster will switch off.
Bagel/baguette function*
Insert your bagel or your baguette, cut in
half, in the toaster with the cut sides facing
the central divider.
Press the "bagel" button. The LED will
turn on. Select the desired toasting level
and press the bread control lever down
until it locks - Fig.
12
The browning time will be automatically
adapted on the selected browning level and
will appear on the display.
At the end of the toasting cycle, the bread
will pop up.
If the bagel is too heavy, lift the
lever up manually to remove the bread.
Waffle, crumpet or brioche toasting
feature*
Insert your crumpets, your waffles or your
slices of brioche in the toaster.
Press the "waffle/crumpet/brioche button"
- Fig. 13 . The LED comes on.
Select the desired toasting level and press
the bread control lever down until it locks.
6
The remaining time for toasting your
waffles, your crumpets or your slices of
brioche will appear on the display.
At the end of the toasting cycle, the bread
will pop up.
Memory function
This function enables you to pre-set four
different toasting settings.
Choosing a pre-set Memory setting:
Press the "memo" button until the desired
pre-set memory setting appears (1-4). The
functions you have pre-selected and input
into this setting will be displayed - Fig.
Start the toasting cycle by pressing down
the control lever until it locks.
Programming the Memory Settings:
To program a setting, select the desired
11 Memory setting (ie: Memo 1, Memo 2,
Memo 3 or Memo 4) by pressing the
Memory button once for Memo 1, twice
for Memo 2... and hold the button down
for a few seconds. The program number
will flash on the screen - Fig.
Choose the functions you want to pre-set
(toasting level, defrost, reheat, bagel, etc.)
by pushing the corresponding buttons.
Once you have finished programming the
functions, press the "memo" button for a
few seconds to record the setting. The
program number will stop flashing - Fig.
To set another memory program, press the
"memo" button and repeat directions as
above.
To quit the memo mode at anytime, press
the "Cancel/Stop" button.
Changing a Memory setting after it has
been set:
Select the setting you want to modify by
pushing the "memo" button until you reach
the required memory setting (1-4) - Fig.
The program will appear on the screen
with the pre-set functions recorded.
Press the "memo" button for few seconds
until the program number flashes on the
screen - Fig.
To remove a recorded function, press the
corresponding function button and it will
be removed from the screen (in case of
15
18
*on selected models only
14
16
17