Table des Matières
Publicité
en
When the child lock is active, no
adjustments are possible via the control
panel. Exception: alarm button in the
event of a warning message.
The
symbol is indicated on the
standard display. If a button is pressed,
the following display is indicated:
S Touch the menu button for 5 seconds.
Child lock is activated.
When sleep mode is active, the lights on
the display and the active button switch
off 10 seconds after the last button was
pressed.
When save energy mode is active, the
sections are adjusted to the required
energy efficient temperatures if less
energy efficient temperatures were
selected previously. Sleep mode is also
activated. The
on the standard display.
If this function is activated, write and read
authorisation is safeguarded at specific
values of the appliance. It is therefore
possible to fully utilise the advantages of
SERVE@home. The
indicated on the standard display.
34
symbol is indicated
symbol is
Making adjustments
The standard settings are changed as
explained in alarm volume example:
The active buttons on the control panel
are lit. If no changes are made:
S Use the menu button to switch to the
next adjustment (brightness).
To change the alarm volume:
S Select the required value with the < or >
buttons.
S Acknowledge the selection with ok. The
following display is indicated:
If no button is pressed, the standard
display is restored after 10 seconds.
Use the menu button to switch to the
next adjustment (brightness).
Publicité
Table des Matières
