Cooling, Dry And Heating Operations; Adjustment Of Fan Speed And Air-Direction, Timer Configuration - Zhendre SMC Notice D'utilisation

4 - Cooling dry and heating operation.
• Push button to start air-conditioner.
• Push button to select operation.
Each pushing of this button changes the mode of operation
in this order from AUTO
• Push button to set fan speed.
• Push or button to set needed airflow direction.
• Push button to set needed temperature.
• If you feel too warm, please push
Thus, you can get most comfort temperature.
• Push button again, operation will stop.
5 - Adjustment of fan speed and air-direction,
timer configuration.
• Adjustment of fan speed, airflow direction and clock to change the fan speed, please press
Fan speed changes in the recyclable order from low speed
to auto in turn when press
Select HIGH SPEED for stronger cooling, and select LOW SPEED when sleeping.
• To change airflow direction, please push
After pushing button, louver swings from angle 1 to angle 4, air blows to every corner of room.
If airflow direction displays Auto, Airflow direction button does not work.
When push button, airflow direction changes
in the recyclable order of AUTO ANGLE 1, 2, 3, 4, 5 to swing.
• To set time, push
function, please push
➥ ➥
AIRFLOW COOLING
or to adjust the temperature.
button once.
button or
or button, then push
button or button again.
13
➥ ➥ ➥
DRY HEATING
, middle speed , high speed
button.
or to adjust time. To cancel the timer
button.
,