Electrical Devices Box; 4 - 5 M Tmp And Fan Cables; Wheels - Agilent Technologies TPS-mobile 9698400 Notice De Mode D'emploi

Masquer les pouces Voir aussi pour TPS-mobile 9698400:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57
17
Technical Information
Description of the TPS mobile
If needed is possible to order a special version of TPS-mobile
equipped with an optional gauge controller named Agilent XGS-600.
By means of XGS-600 is possible to manage a couple of gauges to
monitor pressure on system foreline by means of a convector gauge
(1x10
100 (1x10
3 – Electrical Devices Box
It is a metal box containing all the electrical equipments useful to
manage the vacuum components integrated in the TPS-mobile.
The rear panel of the Electrical Box is equipped with:
4 – 5 m TMP and Fan Cables
On the rear side of Electrical Box 5 m long TMP and Fan cables are
wrapped up. They are useful for the TMP and its fan and operation
far from the pumping system.
5 – Wheels
TPS-mobile is provided with four wheels allowing the system to be
moved and located where vacuum is needed. Two out of four wheels
are provided with a breaking system to avoid accidental moving of
the pumping system during operation.
344/400
Gauge Control Unit (optional)
-3
Torr to atm) and high vacuum pressure by means of a IMG-
-3
-9
to 5x10
Torr).
Main socket – IEC 320 electrical socket for pumping system
power cable connection (except the model 9698433 equipped
with an integrated power cable).
Gauge Port – Fireware connector for active gauge FRG-700
connection (see Chapter "Gauge Connector").
TPS-mobile User Manual / 87-901-005-01 (F)

Publicité

Table des Matières
loading

Table des Matières