A&C home AM60 Mode D'emploi page 20

9 Refit the filters and filtration net
· Refit the filtration net into the bowl by lining up the triangle mark (on top plate of net) and the
line mark on the side of bowl. (PIC.12)
· Put the filters back on the top plate of filtration net (PIC.13), then close the cover clockwise by
lining up the triangle mark (on the side of cover) and the line mark on the side of bowl (PIC.14).
· Refit the dust canister into the vacuum cleaner, simply align the dust canister into its position
(PIC.15) and close until it locks in place (PIC.16).