A&C home AM60 Mode D'emploi page 16

5 Assembly Method
Note: Before assembly, please ensure that you have received all parts listed in the parts list.
Note: Always transport / send the appliance in its original packaging so that it does not become
damaged.
Note: Always remove the plug from the power socked before fitting or removing accessories.
5.1 Fitting rube and accessories (PIC.1)
· Insert the connector (1) into inlet on appliance.
· Connect the end of 1pc tube with connector.
· Connect 2pcs of tube (2).
· Insert another end of tube into the floor brush head (3).
5.2 Tools (PIC.2)
The Crevice tool is used for cleaning the side of sofas and corners, etc.
The crevice tool with brush is used for cleaning grilles and vents. etc.
· Insert the connector (1) into inlet on appliance.
· Connect tool (2) with connect.
6 Controls
In order to avoid product overheated, pls pay attention to the possibility of blockage (
such as blockage in brush / tube / hose or dust is up to "——
6.1. Power and Power cord
· Untied the cord, insert the plug into the power supply
· Press the On /Off button to start the motor.
· After using, unplug and tie the cord together.
—— MAX—— —— " mark
—— —— —— ——