Water Hose - THOMSON WFT6412I Manuel D'installation Et D'utilisation

CONNECTING THE WATER AND
2
DRAIN TUBES
The water supply hose is inside the drum.
a Connect the bent end of the tube to the
grooved input of the water valve on the
rear of the appliance.
b Connect the other end of the tube to
the water supply. Make sure you firmly
tighten the locking nut.
Make sure you connect the elbow of
the water supply hose correctly, to
avoid any risk of flooding.
If your washing machine allows for
connection to a hot water supply
intake, connect the red grooved tube
to the hot water tap and the water
valve to the red filter.
The washing machine must be
connected to the water supply using
the new supply hoses provided with
the appliance. Do not use the old
supply hoses. For the washing
machine to function correctly, the
water pressure should be between
0.05 and 1 MPa (0.5 - 10 Kg/cm
a We recommend a drain hose fixed at a
distance of 50 - 70 cm from the floor.
Make sure the drain hose is not blocked,
kinked or squashed.
CONNECTING THE

WATER HOSE

2
).
CONNECTING THE
DRAIN HOSE
installation and assembly
a
7