Cleaning The Filter; Cleaning The Outside - THOMSON WFT6412I Manuel D'installation Et D'utilisation

CLEANING THE ACCESSIBLE FILTER AND THE OUTSIDE
2
OF THE WASHING MACHINE

CLEANING THE FILTER

The accessible filter should be cleaned if
the drain pump has become blocked by
any foreign objects.
a Open the plinth cover, by pressing the
lug and pulling gently on it.
b Place a dish or similar recipient under
the filter to collect the water that will run
out of it when it is removed.
c Turn the filter a quarter of a turn or a half
turn to the left. The water will start to
run out.
d When all the water has come out of the
washing machine, turn the filter several
times until it can be completely removed
by gently pulling on it.
e Remove the objects or fluff trapped in
the filter.
f Replace the filter and the plinth.
To prevent risk of burns, do not carry
out this operation with washing water
temperatures of over 30ºC.

CLEANING THE OUTSIDE

To clean the outside of the washing machine,
use warm soapy water or a gentle cleaning
product. Do not use abrasive products or
solvents.
Then dry it with a soft cloth.
maintenance and cleaning
a
b
e
If any detergent or additives from the
detergent drawer are spilt onto the
outside of the washing machine, clean
them off straight away as they are
corrosive.
20
c
d